If you have a problem with your drains and need them relined, here is the process of relining explained in full.
There was a time not too long ago that when you had a problem with your drains, you needed to dig them up, creating a lot of mess before you could repair them. However, those days are long gone and using the latest technology, you can have your drains relined and repaired, creating only a little mess. If you need to have your sewers or drains relined and you were wondering about the process, it is explained below in detail and will let you know what to expect.
Locating The Problem
The first thing that you will need to do is locate the source of the problem and see where your drains are broken. You can do this easily by having a CCTV survey of your drains where a camera is placed in the drains and works its way along until locating the problem. When the drain specialists know what the issue is and where it is, they can then start the process of fixing them by relining them.
Cleaning Up The Debris
When the problem has been located, the next step is to remove any debris inside the pipes, which is done using a water jet. The jet can get rid of bits of the broken pipe, as well as a build-up of material inside the pipe, which will allow them to be repaired correctly and ensure that the fix does not fail.
Repairing The Pipe
When it comes to drain relining Waterlooville and other areas of Hampshire have, there are plenty of options when it comes to selecting a reputable company to do the job. Once they have cleared any debris and cleaned the inside surface using the water jet, they will then need to insert the new pipe and inflate it to make the repair.
The new lining is sealed in place using either a polyester or epoxy-based resin lining. Once it is in place, it can last for anywhere between fifty and one hundred years. The repair will be complete, and the resin cured within a couple of hours. Your drains will be ready to be back to full working order.
The Benefits Of Drain Relining
Trenchless technology, such as drain relining has many benefits, and one of the most significant is that it can be the cheapest way to opt for when it’s time to repair your drains. It is also less invasive, and there is no need to dig up your garden; a one-meter square hole is usually all that is needed to do the job. It is possible to reline pipes as small as 100 mm in diameter, and repair pipes as big as 1,500 mm. There is significantly less mess with this method than with digging up the drain, and by the time it is finished, you will hardly be able to tell that you had a problem at all.
Using this trenchless technology to repair your drains will also last for a long time, so there will be no need to look at them again for quite some time. If you have blocked or broken drains and you were worried about repair costs and disruption, it may not be as bad as you think, contact your local experts today and get your drains fixed in no time at all.